How many rounds shot? Any issues?
Subscribe to Remove Post Ads (Also enjoy site upgrades, unlimited photo storage, 1,000 private messages, and more!)
Selling to cover surgery cost on my Pit, tore his ACL. This is the entire rifle for sell. I have another listing for just the upper.
I could not delete or edit or lock my first thread. I can't stand that.
SO I'm doing this so I can edit and drop it without topping old pricing and bumping a turd ad.
Specs for ya. I am looking for cash Only possible trade is A spikes Lower stripped or done, depending on who did what.
Or and AR pistol upper. Don't want a worn used one> I like to wear my own stuff out >)
PN#: R415-14-11H-223 (HSR rail, Black anodized)
PN#: R415-14-11T-223 (Tactical rail, Black anodized))
BARREL: 14.5 inches Pinned to Legal 16.5
ACTION: semi-auto, regulated gas piston rifle with 11" M.R.R.
CHAMBER: 5.56 x 45 mm NATO (.223 Rem)
WEIGHT: 7.5 lbs. (empty)
LENGTH: 32" - 35.25" (ext)
POF-USA M.R.R. Modular Railed Receiver, billet machined 7075-T6
aircraft aluminum alloy
2-piece upper receiver with free floating monolithic top rail
Oversized heat sink barrel nut
A3 flattop upper receiver black anodized
Black anodized charging handle
4150 Mil-B-11595 chrome-moly vanadium alloy (machine gun rated)
"5R polygonal right handed 1x8 twist hand-lapped button rifled barrels
from Rock Creek Barrels, Inc.
70 rockwell case hardened heat treated "5R" polygonal barrels
are 2 times harder than Mil-Spec & hammer forged barrels
Corrosion resistant and 10 times thicker and harder than
Mil-Spec chromed lining
POF-USA triple port muzzle device
Chamber: 5.56 x 45 mm NATO (.223 Rem)
Bolt & Carrier:
Nickel Teflon plated 8620 integral keyed steel bolt carrier
(billet machined), heat treated/plated per Mil-Spec
Roller cam pin NP3 coated
Chrome plated bolt, heat treated to Mil-Spec
P-415, Gen III billet machined 7075-T6 aircraft aluminum alloy
with integral oversized trigger guard
Ambidextrous bolt release lever machined into the lower receiver
Tactical integrated trigger system 4.5 lb non-adjustable single stage
competition trigger group
MOE Pistol Grip Magpul
KNS anti-walk pins
NORGON ambidextrous magazine release
MAGPUL 6-position retractable buttstock with Mil-Spec tube
ERGO ladder rail covers
POF-USA M.R.R. Modular Railed Receiver, free floating
monolithic top rail, tactical rail system
Method of Operation:
Gas piston operated, rotating bolt (short stroke system)
2-position gas plug for normal (N) or suppressed (S) operating modes
C.R.O.S. (Corrosion Resistant Operating System)
Nitrate heat treated: barrel, gas block/tube (billet machined), gas plug
NP3 coated (billet machined), gas piston chromed (billet machined),
bolt carrier assembly NP3 coated (one-piece billet machined),
All raw materials are manufactured from U.S. steel mills.
All heat treats, plating/coatings, are completed by U.S. owned
and operated manufacturers.
All accessory and component parts on weapons systems are from U.S. owned and operated manufacturers.
All of our weapon systems are 100% pure American made.
Regulated short stroke gas piston weapons system requires no lube!
I want to see a valid ID and CCW or pistol permit.
If you don't have one You can meet me at a local Pawn shop, for $20 they will call you in, and we can complete a bill of sale there between me and you.
Shipping to lower 48 is a little high due to 2 grand worth of insurance.
I will ship it but you will pay for it. about $50 in the 2 quotes I've given so far without my ffl f$20 fee, which I'll cover even though I don't want to ship unless it's a must
So $50 shipped the rifle box and mag
Last edited by Cigarhead; 05-15-2012 at 03:28 PM. Reason: SOLD
How many rounds shot? Any issues?
22 mag ammo
No rounds. Haven't put a mag IN it yet.
sent using Taptalk
Sold sold sold
Last edited by Cigarhead; 05-15-2012 at 03:26 PM. Reason: SOLD