Here is an easy how to "camo your ________ using the sponge method"
I had a
Wilson Combat TR (
I've got $$$$$ to burn)I've been eyeing for a while for a camo paint job. I decided today was the day
Here are the paints that were used during the painting WC-TR. They were picked up at the local Lowes Hardware, but can be found any place fine graffitii consumables are purchased.
The sponges I used came from Hobby Lobby. Lowes has them, but they are twice the cost, and come with half as many in the package.
Any crafting supply shop will have these. Mine cost $5.99.
Before you paint your weapon, make sure the oil/grease is removed, as any painted over will come right back off. I suggest a run to your auto parts store and picking up non-chlorronated brake cleaner. The cheaper, the better. Do not use Carb cleaner as it contains a lubricant.
I started out by laying a base over the entire weapon in Rustoleum Khaki. It's shiny where it is wet. Once it cures, it will turn flat like the cans stated.
Using a paper plate(or fine china if you are a baller)spray your next paint of choice. I prefer to mix the darker colors and then go lighter. Keep in mind the color black in a natural enviroment is pretty rare. Just look in the woods for yorself. I prefer to use a brown, or green and then add black to it to get the grade of color I am looking for.
The apply to the rifle. Again the image shows the paint shinny as it has not cured yet.
Once I get my darker layer down, I start mixing up the lighter colors to be added.