[Frmr0317]

NC knocked it out already but I'll second www.robertrtg.com as a great source. I've bought rollers for my Cetme and a lot of other AK and G3 style parts from him over the past two years and I've never had an issue.

 

[Frmr0317]

I PM'd Mike79 over there this morning, and he told me he'd take care of it. I know it's a situation of "buyer beware" anytime you buy a used gun from someone, but for someone to deliberately mislead someone about the condition of gun just to make a sale is BS.

I honestly think once he gets the parts installed it'll run well. It doesn't have a ground bolt, and it doesn't look like the end of the bolt carrier is hitting the cocking tube, so at least he's good there. Century Arms really buggered some of these up, which is unfortunate because they really are nice rifles when they work properly.

If he still needs a recoil spring the cheapest way is to get a G3 stock set from CTD for $20, I've done that twice just to get the spare parts. He'll have to replace or slightly thin the buffer to fit a Cetme but he could even just swap the stock and be ready to go.