NC - WTS: Anderson/BCM/Troy Upper | Carolina Shooters Club

NC WTS: Anderson/BCM/Troy Upper

Discussion in 'Parts & Accessories' started by jenglish, Sep 12, 2014.

Thread Status:
Not open for further replies.
  1. jenglish

    jenglish Club Subscribed Club Subscribed

    Oct 22, 2011
    This upper is brand new, never fired. Headspace checked. Assembled to mil-spec. PISTOL OR NFA LAWS FOLLOWED

    Anderson Manufacturing Complete Upper Receiver

    Mil spec complete upper receiver with M4 feed ramps, charging handle, ejection port cover assembly and forward assist assembly

    Anderson Manufacturing Standard Charging Handle

    Standard charging handle for AR-15 made from 7075 T6 aluminum forging

    Anderson Manufacturing Low Profile Gas Block

    Low profile gas block assembly, made of 6061 al. bore dia. is .750 barrel, designed to fit under free float tube.

    Anderson Manufacturing M16 5.56/.223 Complete Bolt and Carrier Group

    M16 5.56/.223 Complete Bolt and Carrier Group is chrome lined, made from 8620 steel, Bolt is made from 9310 steel and coated per mil spec. MPI Tested. The 223 Bolt and Bolt Carrier Assembly comes complete with cam pin , firing pin and firing pin retainer.

    Anderson Manufacturing Carbine Length Gas Tube

    Carbine length gas tube, 304 Stainless Steel

    Intergrity Arms and Survival 10.5" Melonite Barrel, 1:8 twist, .223 Wylde Chamber

    This is our 10.5" barrel that has been Melonite treated for extreme durability. Done in the QPQ (quench polish quench) form of Melonite which gives a more durable, deeper finish and is the best type of Melonite treatment. We are one of the few companies who assure that our Melonite barrels are done the correct way. Barrels and extensions are treated separately, threads cleaned, and then the extensions are torqued and gas port drilled. This assures that there is no ‘salt bleed’ into the threads, as well as eliminates the potential for the extension to actually work loose from heavy fire. If a company does not specify the way they treat their barrels, then assume it is done the quicker/incorrect way. Melonite has shown to last longer than chrome lining, and can also be more accurate since it is not an added layer. It is indeed a better option for a gun barrel. Please see our FAQ section for more info.

    10.5" M4 Profile
    Wylde Chamber (shoots .223 or 5.56)
    1-8 Twist Rate
    .750 Gas Block Area
    .093 Gas Port Size
    4140 Bar Stock
    6 Groove Button Rifled
    Carbine Gas System
    1/2×28 TPI
    M4/Extended Feed Ramps
    100% Made In U.S.A.

    Troy Claymore Muzzle Device

    Troy M4 Fixed Front Sight

    Bravo Company’s KeyMod™ Rail, 10”

    Manufactured from an exclusive blended aluminum and magnesium alloy, it weighs 30-40% less than aluminum with the same strength properties. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.

    Handguard alone weighs 4.1oz!

    1.3” Inner Diameter

    1.5” OUTSIDE flat to flat.

    Handguard flares forward (towards muzzle end) at the 3 and 9 O'clock positions approximately 1/4"

    What an awesome handguard... WOW IT IS SO LIGHT!!

    $625 FTF or plus $10 towards shipping

Thread Status:
Not open for further replies.

Share This Page