NC - WTT 25-rd 7.62 Pmag, gen3, for 10-rd 7.62 mag, steel (Durham) | Carolina Shooters Club

NC WTT 25-rd 7.62 Pmag, gen3, for 10-rd 7.62 mag, steel (Durham)

Discussion in 'Parts & Accessories' started by gunwonk, Feb 20, 2021.

  1. gunwonk

    gunwonk Not Subscribed

    Joined:
    Apr 11, 2011
    Messages:
    156
    Location:
    Durham, NC
    I need something shorter, so I can get low enough in prone position.

    Here's what I have to trade (I have only this one):
    IMG_20210215_162016.jpg
    IMG_20210215_162123.jpg
    IMG_20210215_162141.jpg

    As you see, it's a gen3 7.62 Pmag, with dust cover, and window. I believe it's 25 rounds.

    In trade I would like a 10-round 7.62 mag, preferably steel. The mag needs to fit a "dpms" style 7.62 AR, not the Armalite AR-10. (Basically, if a 7.62 Pmag fits your rifle, and the 10-rounder you offer fits your rifle too, that's it. Steel 7.62 mags from ASC or D&H should be fine. Confusing? Me too. Check out the 7.62/.308 AR forums, there are plenty of folks there eager to instruct us on the differences.)

    FTF in the Raleigh / Durham / Chapel Hill area, if possible.

    Thanks for reading!
     
  2. ABeck88.2

    ABeck88.2 Registered Member

    Joined:
    Mar 8, 2020
    Messages:
    35
    Location:
    East of Raleigh
    I’m happy to trade a new Gen 3 10 round Pmag for this. In Raleigh downtown area every weekday.
     
  3. gunwonk

    gunwonk Not Subscribed

    Joined:
    Apr 11, 2011
    Messages:
    156
    Location:
    Durham, NC
    You can be #2. There's another guy already offered the same, but neither of you have offered a metal 10-round 7.62 mag, as I'd prefer.

    Anybody out there want to trade their ASC, D&H, or other metal 10-rounder?
     
    ABeck88.2 likes this.
  4. gunwonk

    gunwonk Not Subscribed

    Joined:
    Apr 11, 2011
    Messages:
    156
    Location:
    Durham, NC

Share This Page