[lowcountryfire]

I want to mount a scope i have lying around on my marlin model 60 once I'm done cleaning it up. I noticed when test fitting the scope, that the rail is a lot narrower than a "standard" rail. With that being said, how do I mount one?

 

[029]

22 rings....you can get them @ wal mart ... do some googling as some experience scope "slide" with the model 60's

 

[lowcountryfire]

Ok. I did some googling, but couldn't find what type of rings I needed. I did find some pointers to combat the scope walk.. Must be from all of the hardcore recoil..

 

[Bailey Boat]

If its on a mod 60, its a 3/8" dovetail. The only rings I use are Milletts, they will not walk if installed correctly and are windage adjustable....

 

[SnakeDoctor291]

scope

i have an old tasco on my model 60 and it works just fine. it came like that when i got it from my grandpa. you can get a tasco with the 3/8 rings for around $20. or just find some rings for your scope you have now. either way you might pay around $20.

 

[MarkG]

http://www.pyramydair.com/s/a/Leapers_Accushot_1_Pc_Mount_w_1_Rings_3_8_Dovetail/805

Check over at Opticsplanet (among others) for a Leapers 1 piece mount. You will need to size it for tube diameter and height above the barrel (for exit lens). They come in low medium or high if I remember correctly. Assemble it with Blue Loctite when you are sure of location. Solid, will not walk.

 

[pirate]

Just do a search for Millet 3/8" dovetail scope rings