Anyone in the upstate that would be willing to show me the ropes before I purchase all of this equipment? Do any shops have a reloading class?
Would like to watch someone reload first
foxxtrot
1 - 20 of 21 Posts
Joined
·
12,971 Posts
If you want to cross the border and come up to Hendersonville, NC you're welcome any time. Tim
foxtrot,
Where in the upstate are you located? I work in Gaffney, SC and live in Rutherford Co. NC.
I'd be willing to show you the ropes. I use a single stage press and load for pistol and rifle. One aspect of my reloading kit is that I can make it portable with no trouble.
Shoot me a PM with some contact info and I'll be happy help.
Where in the upstate are you located? I work in Gaffney, SC and live in Rutherford Co. NC.
I'd be willing to show you the ropes. I use a single stage press and load for pistol and rifle. One aspect of my reloading kit is that I can make it portable with no trouble.
Shoot me a PM with some contact info and I'll be happy help.
Joined
·
1,241 Posts
Not sure where your at, but I'm exit 59 off 77 in NC and your more than welcome any time.
Joined
·
9,471 Posts
Watching someone for 15 mins is worth 8 hours of Youtube vids.
A little longer than 15 minutes, but being able to ask questions and get answers is the biggest plus of having someone show you the ropes. I learned the basics by watching my dad reload when I was about 12 years old and that's been 35 years ago.
Reloading is a life skill. Once you know how, it'll stay with you for life.
Joined
·
78 Posts
I've recently been trying to soak up as much info as possible so I
have hit the youtube and found several helpful vids that go through and break down the entire process. Of coarse you dont have the person standing there helping you out and answering questions
have hit the youtube and found several helpful vids that go through and break down the entire process. Of coarse you dont have the person standing there helping you out and answering questions
Joined
·
376 Posts
Fox, up Hwy 11 to US 25N will get you to Hendersonville, then US 64W to Etowah will get you to both the Seabee or myself in a couple hours or so. You could learn to do it all by yourself, many of us have, but your comfort factor would be MUCH higher with a guided start.
If you shoot a cartridge we have dies for you could load a few rounds and then shoot them on my "range" (AKA, pasture). PM either of us if you're interested, we can make it happen.
If you shoot a cartridge we have dies for you could load a few rounds and then shoot them on my "range" (AKA, pasture). PM either of us if you're interested, we can make it happen.
Joined
·
265 Posts
I'm near Spartanburg. I'd be happy to.
Anytime as well for me. I'm near Chuck in Fuquay. Far for you, but anytime. .45, .40, and .223. Prob start 9mm later this year.Fatal vision. I live in apex and reload pistol ammo. Your welcome to stop by and reload some
Chuck
Shannon
Joined
·
4,602 Posts
We will have a hands on reloading class in April at our gathering. Any who have portable reloaders please plan on bringing them so many can participate. We did it about four years ago and folks worked for hours that night "perfecting" their new skills. Probably the 3rd weekend in April at Camp Millstone near Rockingham. Will post under NC/SC events as time grows near. wc
Joined
·
376 Posts
"We will have a hands on reloading class in April at our gathering."
I give up, where do "you/we" gather?
I give up, where do "you/we" gather?
Joined
·
72 Posts
reloading in Winston Salem
Greetings,
I would also like to observe the reloading process who is familiar with .223 69 gr or longer and .308 155 gr and heavier for long range target. I have all the single stage component except for a swage tool ?dillon 600 to uncrimped military brass. I have several types of dies, bullets, brass, primers and powders of all types for both calibers.
Anyone in Winston salem area or sorrounding? Don't mind repaying with burgers and fries. Thanks
J. Ubalde
919 344 1203 Winston Salem
jubalde@aol.com
Greetings,
I would also like to observe the reloading process who is familiar with .223 69 gr or longer and .308 155 gr and heavier for long range target. I have all the single stage component except for a swage tool ?dillon 600 to uncrimped military brass. I have several types of dies, bullets, brass, primers and powders of all types for both calibers.
Anyone in Winston salem area or sorrounding? Don't mind repaying with burgers and fries. Thanks
J. Ubalde
919 344 1203 Winston Salem
jubalde@aol.com
1 - 20 of 21 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
